Cast chains are manufactured using cast links and heat treated steel pins. They are designed with slightly larger clearances that allow the material to very easily work its way out of the chain joint. Cast chains are found in a number of applications such as sewage treatment, water filtration, fertilizer managing, sugars processing and waste wood conveying. They are readily available from stock with regular attachments.
Our Cast Chains
Combination rooftop transfer chain is utilized chiefly in two or more strands on transfer conveyors handling lumber, boxes, deals, barrels, bars, etc. Just the bevel tops of the links project about the manuals, permitting loading and unloading to be achieved transversely.
Rooftop transfer chain is utilized chiefly in two or more stands on transfer conveyors handling lumber, boxes, deals, barrels, bars, etc. Only the bevel tops of the links project about the guides, permitting loading and unloading to be achieved transversely.
900 class intermediate carrier chains were designed primarily for sugar mill provider. Multiple strands may possess overlapping, beaded slats installed on them to create a continuing apron for an intermediate carrier conveyor.
Combination type drag chains are designed with sections heavier than comparable sizes of H type drag chains. The double offset put on shoes and boots on the cast hyperlink provide wear surfaces for both holding and return runs, thus increasing chain life.
700 class pintle chains are of one-piece cast offset hyperlink construction joined together by steel clipped mind pins. The pins are safely locked against turning in the sidebars by generous head stops cast on the links. The head stops are positioned to supply maximum locking impact when the chain can be under load. This confines the put on to the area of the pin within the barrel of the link, where it is distributed over the utmost area. This insures the best toughness of the chain.
H class mill chains are of one-piece cast offset hyperlink construction joined collectively by steel clipped heads. They are used primarily for drag conveyor provider in the lumber, pulp and paper industries. Also, they are desirable for transfer and conveying reasons.
400 course pintle chains are of one-piece cast offset hyperlink construction became a member of together by metal pins. The pins are safely locked against submiting the sidebars by generous head stops that are cast on the links. The top stops are positioned to supply maximum locking effect when the chain is under load. This confines the use to the part of the pin within the barrel of the hyperlink, where it is distributed over the utmost area. This insures the best strength of the chain.
We can offer an array of cast chain items for use in sewage drinking water treatment equipment, in addition to conveying applications in glucose making and steelmaking industries. Our chains could be cast using varied material elements, based on specific usage requirements and desired technical requirements. All cast chains include simple structure and few pores, boosting very high tensile strength.