The EP Greenhouse gear motor is a concise and lightweight reduction geared motor with an integrated limit switch system that is suitable for assembly of a locally available electric motor. The geared motor is utilized in manually-controlled or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-install EP gear motor is rainproof and windproof. The gearbox has a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise gear motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft can be locked when the decrease gearbox isn’t running. The fully sealed reduction gear driver has an expansion chamber with a diaphragm to keep the gear oil at a low pressure under all conditions, even at high temps. Thanks to the use of an growth chamber, the reducer could be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction reducer keeps the apparatus oil of the geared motor in ideal condition because of its entire operating life time. The gear reducer is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an integrated chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit change system is accessible and simple to adjust. The limit switch system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear reducer for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).